2-blade, 2 m road drag.
High blades and proven cutting angles provide optimum scraping results.
2-blade road drag with a wheel which is adjustable to seven heights• Working width 200 cm
• Height from frame base to ground 21 cm
• Length including gravel spreader 420 cm
• Three-point linkage cat. 2
• Wheel adjustable to seven heights
Simple and stable design for three-point linkage on tractors.
Working width of 2 metres, recommended road width 3.5 m. High blades with proven cutting angles provide a very good scraping result.
High blades with proven cutting angles.
The gravel spreader is equipped with a wheel adjustable to seven heights, which ensures spreading on the rake. Extra steerable stone-repelling wing on the rake, good for removing larger material.
Rake with extra steerable stone-repelling wing.
Wheel adjustable to seven heights.
With Z-cut for optimal operation and resistance. The upper edge prevents material from going over the blade and the lower edge is bent backwards for optimal strength. The drag has a strong hollow structural section which makes it stable during operation.
With Z-cut for optimal operation and resistance.
Strong hollow structural section.
Supplied complete with load box. Load with heavy weight e.g. a large stone, for better results on hard road surfaces.
Load box for better results on hard road surfaces.
Here you can see a film about our 2 m road drag
|Working width||2,000 mm|
Choose company or private shopping