Forestry trailer with crane 3.6 m

Powerful forestry trailer with 9 hp petrol motor for ATVs or smaller tractors.

£4,350 Excl. Tax
Temporary out of stock. For delivery information, contact your dealer.
SKU
21-SV20/GL36

An affordable ATV timber trailer with a professional small-sized crane

• 9 hp petrol motor
• For smaller tractors or ATVs
• Terrain-friendly bogie
• High ground clearance
• Stable frame makes it easy to pull the trailer


ATV/tractor trailer with hydraulic crane, GL-36 and with 9 hp petrol motor which drives the hydraulics to the crane and stabilisers. Power is distributed via a multi-lever valve block.

Terrain-friendly bogie.

High ground clearance.


The crane is based on the same well thought-out technology as the large cranes, angled boom, fully rotating rotator, comfort link on the outer arm, top-mounted cylinders and hose inserts in boom and outer arm. It provides a strong crane with a superior movement pattern, picks up the timber alongside the trailer or headboard safely, and the risks for exterior damage to hoses, nipples and cylinders are minimised.

Strong crane with superior movement pattern.


Sliding bogie enables the centre of gravity to be adapted according to different timber lengths, this is important as your ATV should not be put under too much pressure or under too low or negative pressure.

Sliding bogie enables the centre of gravity to be adapted according to different timber lengths.


Hydraulic stabilisers make the trailer steady and stable when loading and unloading. Flat underside and plenty of ground clearance together with a terrain-friendly bogie make it safe and smooth to drive even in hard terrain.

Hydraulic stabilisers make the trailer steady and stable when loading and unloading.


The crane can be equipped with a hydraulic remote-controlled winch and bucket insert, which enables you to obtain greater benefit from your trailer.

The trailer is supplied with oil in the system, test driven and with a 50 mm articulated ball hitch.

A flexible insert floor is available as an accessory. See more here.

Here you can read more about our forestry trailer with wheel drive.

The grapple loader valve is available in two designs:

• Multi-lever: 7 sections, supplied as standard

• 2-lever: 7 sections at a reduced price (applies only when purchasing trailer). For more information, contact your dealer.

This product has to be assembled by Kellfri's staff. For delivery information, contact your dealer.

Here you can see a film about our forestry trailer with crane


The crane in the film is our old 3.4 m model, which is now 3.6 m.

Forestry trailer with crane including wheel drive


The crane in the film is our old 3.4 m model, which is now 3.6 m.


Videos
More Information
Central beam80x80 / 90x90 mm
Ground clearanceC-pipe 400 mm
HeadboardHeight 700 mm
Gripping area0.08 m²
Grapple690 mm
Wheels23 x 10 x 12
Hydraulic stabilisersStandard
Load widthInternally 600 mm (bottom), 1,100 mm (top)
Ground clearance400 mm
Max. load2,000 kg
Motor for the hydraulic valve block9 hp
Crane reach3,600 mm
Fully rotating rotatorStandard
Bolsters4
Operating weight510 kg
Total width1,350 mm
Valve blockMulti-lever Standard
WeightTrailer: 405 kg
Motorised pump: 48 kg

Upsell products