Forestry trailer 6 tonnes with crane 4.7 m
Two-lever valve block and hydraulic stabilisers as standard.
A versatile forestry trailer that works well with tractors 40 hp or moreKellfri's forestry trailers and cranes are powerfully dimensioned forestry rigs with optimum manoeuvrability and maximum range of movement. Created by our designers to be efficient in the forest without compromising on safety.
The safety headboard is more than sufficiently sized to protect the operator. All hydraulics and hoses are built in and guarded to minimise the risk of external damage.
Plenty of free space below the trailer to allow it to easily pass over any obstacles and a terrain-friendly bogie equipped with 11.5/80-15.3 wheels. The trailer has a low centre of gravity and hydraulic stabilisers for stable loading, unloading and operation. Articulated steering with one cylinder
The crane is equipped with a bent lifting arm providing maximum lifting capacity in flat ground positions. Top-mounted lift cylinders in protected position. The interior hoses in the lifting arm and articulated boom are protected from external damage during operation.
The trailer is equipped as standard with articulated tow bar, parking jack, 2-lever valve block, hydraulic stabilisers, fully rotating rotator. When you buy a Kellfri forestry trailer, it will be supplied with oil in the system, fully assembled, test driven and ready for use.
The forestry trailer requires one return and one double-acting hydraulic outlet on the tractor. The trailer is supplied with four hydraulic ½ inch, quick coupling male hoses. The trailer is equipped with brakes.
The grapple loader valve is available in three designs:• 2-lever: manual valve block BLB, supplied as standard
• 2-lever, el. on/off: power-operated grapple and extension boom at a reduced price, £690 excluding VAT (applies only when purchasing trailer). For more information, contact your dealer or read more here.
• Lightweight valve block, el. on/off: two-lever with power-operated grapple. extension boom and stabilisers. Reduced price, £1,890 excluding VAT (applies only when purchasing trailer). For more information, contact your dealer or read more here.
When purchasing: Loading ramp is required when unloading.
The trailer in the images may be equipped with additional equipment.
This product has to be assembled by Kellfri's staff. For delivery information, contact your dealer.
Here you can see a film about our timber trailer with a 50 hp tractor
Spareparts for Forestry trailer 6 tonnes with crane 4.7 m
- Central beam
- 140 x140 mm
- Ground clearance
- 520 mm
- 1,090 mm (height)
- Gripping area
- 0.18 m²
- 1,000 mm (width)
- Hydraulic stabilisers
- Load width
- 1,100 mm (bottom), 1,560 mm (top)
- Swivel tow bar eye
- Lifting capacity
- at 4.7 m: 300 kg
- Max. load
- 6,000 kg
- Articulated steering with one cylinder
- Recommended power requirement
- 30-60 hp
- Recommended oil flow
- 20-45 l/min
- Crane reach
- 4,700 mm
- Fully rotating rotator
- System pressure
- 17 Mpa
- Total width
- 2,000 mm
- Total length
- 5,400 mm
- Transport case
- Valve block, 2-lever
- 1,600 kg
- Slewing cylinders, slewing house crane
Accessories for Forestry trailer 6 tonnes with crane 4.7 m
Hydraulic winch for grapple loader with valve block and radio remote controlRead more
Complete winch package with winch and radio remote control.Read more