Verge flail mower, 1.4 m
For tractors with 50 hp or more.
Cuts road embankments and pastureland• 1.4 m working width for tractors with 50 hp or more
• 20 powerful forged hammer flails make cutting grass and saplings an easy task
• The hydraulic side shift adjustment means you don't drive over and flatten uncut grass
• Cutting head can be angled 42° downwards and 90° upwards
• Sturdy support rollers make it easier to stay close to the ground and achieve a good cutting result
• High level of safety thanks to collision protection that angles the machine upwards if you hit a stump
Choose a verge flail mower if you need to cut both behind and to the side of the tractor. As well as using it as a regular pasture topper, you can also use it to cut ditches, hedges and overhang by using the side shift adjustment and angling the cutting head.
This machine is has a very sturdy construction and has forged hammer flails, which means you can cover surfaces tougher than grass. The flails cover saplings with ease and cleverly fold back if you hit logs or stones.
Other useful facts about the verge flail mower:• You connect it to the tractor's three-point linkage
• 98 cm hydraulic side shift adjustment, enabling full side shift cutting by the machine with tractor widths of 196 cm
• Two double-acting hydraulic outlets on the tractor are used to control the side shift adjustment and the angle of the cutting roller
• Supplied with PTO drive shaft and transmission oil, plus four hydraulic ½ inch, quick coupling male hoses
Please note: The machine requires two double-acting hydraulic outlets and a certain amount of assembly has to be carried out by customers.
You can watch a film showing our verge flail mower in action here
Spareparts for Verge flail mower, 1.4 m
Hammer flail 140 mm for verge flail mower 35SK140.
Y-flail for flail mower and verge flail mower 35-SK140/180/220 and 35-VKM145/175/195H.
Bolt M16x100 for hammer flail for verge flail mower SK140/SK180/220 and flail mower 35-VKM145/175/195.
Spacer sleeve for y-flails for flail mower and verge flail mower 35-VKM145/175/195H
Lock nut M16 for hammer flail for verge flail mower 35-SK140/SK180/SK220 and flail mower 35-VKM145/175/195.
Cog belt BX53 for verge flail mower SK140
Stabiliser long for verge flail mower SK140
Stabiliser short for verge flail mower SK140
Protective hood PTO plastic for verge flail mower SK140/180
Tipper ram for verge flail mower SK140
Rotation cylinder for verge flail mower SK140
- Working width
- 1,400 mm
- Power requirement
- 40 - 80 hp
- Operating speed
- 6 - 12 km/h
- x 20
- Three-point connection
- Cat. 2
- 540 rpm
- 500 kg